Slingfin NFT (Nice flat tarp)
- Secure payment by Paypal
- Svea invoice: Order now, pay later, slice your payments!
- 30 Day Returns Policy
- Fast shipping throughout Europe
Description
Article no.: 2388
Slingfin NFT (Nice flat tarp)
The flat tarp is the quintessential shelter, prized for its versatility, simplicity, and roominess. A flat tarp can be adapted to just about any set of conditions by changing the pitch, and is equally at home as an emergency shelter on a day-long ski tour or as a group hangout for cooking on a rainy backpacking trip.
Our NFT is a 9.5' x 10' flat tarp that addresses several qualms we had with most flat tarps by adding subtle catenary curves around the long edges, which make for a gorgeous, taut pitch in the A-frame configuration, unlike straight-edged tarps, which tend to flap due to bias stretch in the large side panels. However, we didn't add a caternary cut to the ridgeline seam so your pitching configurations wouldn't be limited to an A-frame. We also added cord tensioners at both ends of the guylines to make trekking pole positioning straightforward and quick.
Our 10D NY66 ripstop sil/sil fabric is perfect for the NFT. It has already been field-proven in our Portal, SplitWing, and 2Lite. It's ludicrously packable, has a terrific strength-to-weight ratio, absorbs less water (and sags less) than PU-coated fabrics, and has astounding UV resistance.
The NFT comes loaded with 6 pre-attached 1.5mm reflective Dyneema guylines, 4 accessory guylines, and 12 of the larger 8" long DAC J-stakes so you can pitch the NFT anywhere, any way.
With its packability, light weight, and practically unlimited pitch configurations, we'll think you'll agree... this is a Nice Flat Tarp.
FEATURES
- Generously sized at 9.5' x 10'
- Compatible with SplitWing Mesh Body and most bug tents
- Tons of tie-outs for numerous pitch types
- Catenary cuts along the edges for taut pitching
- Includes 10' pre-attached ridge guylines and 8' pre-attached corner guylines
- 4 additional 8' guylines included in accessory sack
- Includes 12 8-inch DAC J-stakes
- Cord tensioners at both ends of all pre-attached guylines
- 3 long-edge perimeter pull outs
- 4 mid-panel guy loops (two on each side)
- 2 mid-ridge line guy loops
- 20D PE-coated reinforcements
SPECS
| Minimum Weight (tarp only) | 12.3oz (349g) |
| Minimum Weight (including pre-attached guylines) | 13.6oz (386g) |
| Packaged Weight | 1lbs 5.8oz (618g) |
| Dimensions | 120" x 115" (3.05m x 2.92m) |
| Packed Size (uncompressed) | 4" x 4" x 9" (10cm x 10cm x 23cm) |
| Total Area | 95.8 sq ft (8.9 sq m) |
| Guy out loops | 6 |
| Perimeter pull out loops | 6 |
| Included Guylines | 6 pre-attached, 4 additional (1.5mm Dyneema core reflective cord) |
| Included Stakes | 12 DAC J-Stakes size M (8"/20cm) |
| Tarp Fabric | 10D Nylon 66 ripstop sil/sil |
| Reinforcement Fabric | 20D Nylon ripstop sil/PE |